[MAP] Stiglitz Options

[keMoN]

Report to KeMoN (Stiglitz' mapmaker) on Twitter/Discord: https://twitter.com/realkemon

Else not much we, regulars, can do.

Reporting on this forum is perfectly fine as I usually check them daily.

@neropl you should have some log files of some sorts. Please check your server directory. I can't really help you without knowing what's wrong.
With 33MB I don't consider the map overly large, however you might try checking if you have some kind of filesize limit in place in your server config?

Other than that, I really can't help you without knowing what's going on on your server behind the curtain.
If you have privacy concerns, please strip the logfiles from any private directory paths, IPs before sending them to me or better just posting here, in case another server admin has a similar problem.

Thanks for your report.

[rafael_vc1973]

not sure why but when I added this map to my server it reboots when map is chosen.

Do you get any sort of error message when this happens, Nero? Is there any information pertaining to this reboot in your server logs?

When I chose map to load nothing happen for long time I'm kind of getting frozen screen and I get disconnected from server. After I reconnect I see that server is rebooted and started with default map. No errors of any kind.
I removed almost all maps to try but still the same. I really would like to have it working as it looks like very nice map but maybe have to wait until new version comes up.

The same thing happens in my noquarter server.

[neropl]

not sure why but when I added this map to my server it reboots when map is chosen.

Do you get any sort of error message when this happens, Nero? Is there any information pertaining to this reboot in your server logs?

When I chose map to load nothing happen for long time I'm kind of getting frozen screen and I get disconnected from server. After I reconnect I see that server is rebooted and started with default map. No errors of any kind.
I removed almost all maps to try but still the same. I really would like to have it working as it looks like very nice map but maybe have to wait until new version comes up.

The same thing happens in my noquarter server.

I think I found one error
ERROR: Hunk_Alloc failed on 4097856
That was in etconfig.cfg on server
sorry it was in etconfig.log and in etconfig.cfg hunkmeg is default 56 and nothing I do is changing that as after reboot come back to same 56 number.
I think /com_hunkmegs it's showing your local computer set to certain number as it give me proper 192 or 256 whatever I set by /set com_hunkmegs but in etconfig.cfg always is 56.
that map is always rebooting server and I don't know what settings are doing that or how to change hunkmegs higher on server so after reboot etconfig.cfg show new settings and not going back to default.

This post has been edited by neropl: Oct 7 2018, 06:48 PM

[$mart]

Hi man - runs fine on nitmod, run your server with

+set com_hunkmegs 192

++

[ETc|Jay]

i noticed that too with "ERROR: Hunk_Alloc failed on...."
its not only serverside, some players told me they cant connect.

[Wolf Enstein]

We still have players in 2018 who run with their hunkmeg allocation set to 56?

[rafael_vc1973]

Hi man - runs fine on nitmod, run your server with

+set com_hunkmegs 192

++

How can I edit it?

server.cfg?
noquarter.cfg?

[macbeth]

Hi man - runs fine on nitmod, run your server with

+set com_hunkmegs 192

++

How can I edit it?

server.cfg?
noquarter.cfg?

is for you profile
https://enemyterritory-stuff.net/forums/top...nemy-territory/

[neropl]

Hi man - runs fine on nitmod, run your server with

+set com_hunkmegs 192

++

How can I edit it?

server.cfg?
noquarter.cfg?

is for you profile
https://enemyterritory-stuff.net/forums/top...nemy-territory/

what about server itself though as my profile is fine just when choosing this map server reboots itself no matter of your profile.

[keMoN]

what about server itself though as my profile is fine just when choosing this map server reboots itself no matter of your profile.

Please launch your game and type "/com_hunkmegs" in the console and double check, that the number that is printed is at least 128.
If that is not the case, type "/seta com_hunkmegs 128". Notice the seta and not set. Seta writes that cvar into the autoexec, which gets loaded at game launch. After doing that, restart and recheck that cvar.

I think I found one error
ERROR: Hunk_Alloc failed on 4097856
That was in etconfig.cfg on server
sorry it was in etconfig.log and in etconfig.cfg hunkmeg is default 56 and nothing I do is changing that as after reboot come back to same 56 number.
I think /com_hunkmegs it's showing your local computer set to certain number as it give me proper 192 or 256 whatever I set by /set com_hunkmegs but in etconfig.cfg always is 56.
that map is always rebooting server and I don't know what settings are doing that or how to change hunkmegs higher on server so after reboot etconfig.cfg show new settings and not going back to default.

This error is directly related to the com_hunkmegs cvar. Again, increase your com_hunkmegs. I have mine on 512. Unless you are running ET on a potato, there is no reason for you not to increase hunkmegs. Modern computers have at least 4GB of RAM if they are bad. 8-16GB is standard. Letting it use a measly 512MB will hardly do anything, let alone 128MB.

[rafael_vc1973]

I think I found one error
ERROR: Hunk_Alloc failed on 4097856
That was in etconfig.cfg on server
sorry it was in etconfig.log and in etconfig.cfg hunkmeg is default 56 and nothing I do is changing that as after reboot come back to same 56 number.
I think /com_hunkmegs it's showing your local computer set to certain number as it give me proper 192 or 256 whatever I set by /set com_hunkmegs but in etconfig.cfg always is 56.
that map is always rebooting server and I don't know what settings are doing that or how to change hunkmegs higher on server so after reboot etconfig.cfg show new settings and not going back to default.

I will try to explain ...

In my config, I have established the hunkmegs with a value of 512
and I have no problem playing any map online.
I also have no problem when I run the game in mode
HOST GAME
and charge this map: Stiglitz Beta 1.
I can play it perfectly.


I'm a clan leader with a server in noquarter.
I wanted to put the map in one of my campaigns in rotation mode.
I uploaded the map to my server and edited it conveniently.
The problem is that when it's time to play that map
the server crashes and restarts.

And I do not know how to solve it.
Why can not you play that map on my server?

Do I have to change something in the configuration of my server?

I hope I have explained it properly.
I think it's the same case as the user neropl

This post has been edited by rafael_vc1973: Oct 21 2018, 05:06 PM

[ETc|Jay]

server needs higher hunkmeg value too

http://forum.splatterladder.com/index.php?...ost&p=87904

This post has been edited by ETc|Jay: Oct 21 2018, 01:25 AM

[neropl]

server needs higher hunkmeg value too

http://forum.splatterladder.com/index.php?...ost&p=87904

as I wrote before I tried to change that in etconfig.cfg but it's not staying there and changing back to 52 by itself after reboot not sure why is doing that and how to change it permanently.

[macbeth]

to see the valor value for the server type in console :

/rconpassword xxxxx

/rcon com_hunkmegs

result might be
: Command (0): com_hunkmegs
"com_hunkmegs" is:"192" default:"56"

i use qtracker to can manage servers but u can do the same when you are on the server : open the console and type the same

This post has been edited by macbeth: Oct 21 2018, 08:34 AM

[$mart]

Hmmm I'm quite sure the value has to been set in command-line, not in etconfig.cfg or else file.

I've forgotten how it works, but for sure if your run your server with

+set com_hunkmegs 192

your server won't crash.

Exactly I've all these values in command-line:

/xxxxx/etded.x86 +set dedicated 2 +set net_ip 188.213.168.130 +set net_port 27000 +set fs_game nitmod +set com_hunkmegs 192 +set sv_punkbuster 0 +exec nitmod.cfg +set fs_homepath /xxxxx +set fs_basepath /xxxxx +set sv_autoUpdate 0 +set sv_maxGetstatusCheck 0 +set net_port_extra 27100 +set sv_maxclients 64

Or ask your provider and show him this example, good luck

This post has been edited by $mart: Oct 21 2018, 01:15 PM